Model No:SPBOD-6
| Model No. | SBOD-2 | SBOD-4 | SBOD-6 | SBOD-10 | SBOD-12 | SBOD-15 |
|---|---|---|---|---|---|---|
| Temperature Range | Ambient +5°C to 60°C | |||||
| Temperature Accuracy | ± 0.5°C | |||||
| Capacity | 2 Cuft | 4 Cuft | 6 Cuft | 10 Cuft | 12 Cuft | 15 Cuft |
| Volume | 64 Ltrs | 112 Ltrs | 171 Ltrs | 280 Ltrs | 340 Ltrs | 425 Ltrs |
| Trays | 1 | 2 | 2 | 3 | 3 | 3 |
| Temperature Uniformity | ± 1°C | |||||
| Construction | Double walled with Glass Wool / PUF Insulation (at additional cost) | |||||
| Inner Construction | Stainless Steel | |||||
| Exterior Construction | Powder Coated Mild Steel Sheet | |||||
| Exterior Door | Solid door with rubber gasket & observation window | |||||
| Inner Door | Transparent door to view samples | |||||
| Heating Element | U-shaped SS tubular heaters | |||||
| Interior Illumination | LED Light | |||||
| Air Circulation | Axial Fan | |||||
| Ammeter | Analogue Current Meter | |||||
| Temperature Controller | Microprocessor PID controller Display of SV & PV |
|||||
| Temperature Sensor | Pt100 - Sensor | |||||
| Refrigeration System | CFC Free Compressor | |||||
| Temperature: | Standard temperature range of our BOD Incubators is 5°C to 60°C. BOD incubators are equipped with digital PID controller as temperature accuracy and uniformity both are important in incubation process. PID Controller displays both SV (set value) and PV (Present value). |
| Illumination: | A Fluorescent or LED light is present in chamber, which is controlled by switch to On or OFF permanently. |
| Cooling & Heating: | The cooling temperature of the chamber is maintained by CFC Free Compressor. Heating is done by ISI mark U shaped air heaters. |
| Air Circulation: | Air circulation is mandatory to spread uniform temperature inside the chamber; for this we use axial fans or motorized blower system. |
| Construction: | BOD incubator’s construction is durable and double walled; exterior is made of thick powder coated mild steel & the interior is made of stainless steel. The gap between these two walls is filled with PUF insulation or Glass wool. Outer door is solid and there is also an inner door made of Transparent Acrylic Sheet to view samples. |
| Trays: | Each BOD Incubator is provided with 2 to 4 removable trays. These trays are removable and height adjustable and made of steel wire mesh cable. We also provide perforated stainless steel trays as option. |
| Optional Features: 21 CFR software, PC interface and PLC based HMI controller with USB interface and validation port at either side of the machine. | |
